Description
Application:
It allows to detect leackage or flooding of a conductive liquid (water) on a surface.
Suspension electrodes are designed to signal the presence of a conductive liquid caused, for example by burst pipes.
Suspension electrodes should only be used in normally dry environments. The electrode rods must point downwards. If the two electrode rods of a suspension electrode come into contact with a conductive liquid (e.g. water, acid etc), an electrical contact is made and an alarm signal given.
Description:
The EHW suspension electrodes are each fitted with two separate electrodes in the form of two electrode rods: 1 control electrode and
1 earth electrode. As soon as a trace of a conductive liquid creates a conductive path between the two electrode rods, a control current flows from the corresponding electrode relay. The latter is then energized and a contact made.
The EHW suspension electrode may only be connected to either the Leckstar 101 or Leckstar 101/S electrode relay.
Technical data:
Electrode rods:stainless steel 316 Ti; other materials (e.g. titanium, Hastelloy, Monel or tantalum) on request
Cable break monitoring: with integrated Z10 cable break monitoring unit.
Cable length: 2 meters (other lengths available).
Max. length of connecting cable between electrode relay and suspension electrode: 1000 meters
Mounting accessories (not included): stuffing glands, housings with integrated stuffing gland or flanges with stuffing gland on request
It allows to detect leackage or flooding of a conductive liquid (water) on a surface.
Suspension electrodes are designed to signal the presence of a conductive liquid caused, for example by burst pipes.
Suspension electrodes should only be used in normally dry environments. The electrode rods must point downwards. If the two electrode rods of a suspension electrode come into contact with a conductive liquid (e.g. water, acid etc), an electrical contact is made and an alarm signal given.
Description:
The EHW suspension electrodes are each fitted with two separate electrodes in the form of two electrode rods: 1 control electrode and
1 earth electrode. As soon as a trace of a conductive liquid creates a conductive path between the two electrode rods, a control current flows from the corresponding electrode relay. The latter is then energized and a contact made.
The EHW suspension electrode may only be connected to either the Leckstar 101 or Leckstar 101/S electrode relay.
Technical data:
Electrode rods:stainless steel 316 Ti; other materials (e.g. titanium, Hastelloy, Monel or tantalum) on request
Housing: PP; other materials (e.g. PVC, PVDF or PTFE) on request; 28 mm Ø xapprox. 130 mm high
Electrical connection: connecting cable 2 x 0.75, length 2 metres, longer cable on request; connecting cable made of CM or PTFE on request
Temperature: – 20°C to + 60°CElectrical connection: connecting cable 2 x 0.75, length 2 metres, longer cable on request; connecting cable made of CM or PTFE on request
Cable break monitoring: with integrated Z10 cable break monitoring unit.
Cable length: 2 meters (other lengths available).
Max. length of connecting cable between electrode relay and suspension electrode: 1000 meters
Mounting accessories (not included): stuffing glands, housings with integrated stuffing gland or flanges with stuffing gland on request
Related products